Product Manual

Page 4

INSTRUCTIONS (CONTINUED)

KEEP MACHINE CLEAN AND FREE OF DEBRIS. DON’T WEAR LOOSE CLOTHING.

deally the rim

sho

uld

be cen

tered over the center hole on the Tire Changer. Before cinching the rim

tight, determine which center post to use. If the wheel has a hole through it large enough to use the

large center post, use it. If it’s seated with a bearing (see Fig. 5) use the appropriate sized shaft 1/2”,

5/8” or 3/4” from either of the center posts available.

Now tighten the adjusting clamp to secure the wheel.

Tip: Make sure to secure the edge of the rim (see Fig. 6).

Fig. 5

Fig. 7

Fig. 6

Lubricate the tire and entire

rim flange area

around the tire before mounting or

dismounting the tire (see yellow arrow in Fig.

5).

Make sure the tire bead is in the drop center of

the rim for this process. Press and hold with

one hand while prying the Mongoose Tire Tool

around the center post.