Product Manual

Page 2
GENERAL INFORMATION
General: Remove contents from box and assemble as shown below in Fig. 1.
Read and follow instructions for optimum use.
Overview:
The CH-22 Multi-Tire Changer accommodates tires ranging from 4” to 16.5” in diameter.
This is made possible by using different center posts and varying the position of the jaw
clamps.
With the assortment of other available options it gives the Multi-Tire Changer an even
broader range of tire size capabilities to work with along with increasing a users operational
flexibility.
WARNING - WEAR SAFETY GLASSES
USE CAUTION! Machine can cause fingers or hands to be pinched.
Use a suitable tire and tube lubricant for mounting and removal.
Unit comes with the following: (See cover)
These two Center Posts (with four shaft sizes) are provided for either bearing center or hub center wheels.
Rim Size
Decal
Handle & Threaded
Rod Assembly
Fig. 1
Jaw Clamps (3)
Pins (2)
Bolt holes for
mounting
Slide Arm (3)
14 adjustable
Pin locations
CH-22: Primary Features
• PN 10950 Small Center Post
24” Long with 18” being 3/4” Diameter. Final 8” is 1/2” Diameter
• PN 10951 Large Center Post
24” Long with 18” being 1” Diameter. Final 8” is 5/8” Diameter
• Mongoose Tire Tool
Mongoose Tire Tool
Center Post