Product Manual

EGAP
3451 South 40th Street • Phoenix, Arizona 85040 • Toll Free 800.223.4540 • Arizona 602.437.5020 • Fax [phone]
CH-22 MULTI-TIRE CHANGER
INSTRUCTION-GENERAL
SECTION T W O
2
Sliding clamps are positioned to proper wheel size as
indicated by numerical marks on each arm. Pins are inserted
to the outside of clamps. Snug the2clamps against the
pins.
The adjusting clamp is positioned to a size larger than wheel
tobeservicedbyrotatingcrankarm.
Wheel is placed in position. Wheel rim is pushed against the
twosliding clamps.Insertthe appropriatecenter post intothe
wheel center seating it into the center hole of the changer.
Tightentheadjustableclamptosecurewheel.
2.2
2.1
2.3
C
M
Y
CM
MY
CY
CMY
K
TSI new- CH-22 Ops Instr.pdf 5/5/2011 11:55:46 AM