Judy - CH-22 Ops Instr.pdf 5/4/2011 12:39:29 PM C M Y & CM MY CY CMY K CH-22 MULTI-TIRE CHANGER T S I TIRE SERVICE EQUIPMENT MFG. CO. INC. Rev.
Judy - CH-22 Ops Instr.pdf 5/4/2011 12:39:48 PM CH-22 MULTI-TIRE CHANGER INFORMATION-GENERAL S E C T I O N O N E The CH-22 will accommodate all wheel sizes 4" - 16.5" diameter. The wheel is held in place by two sliding jaw clamps 1.1 and one adjustable jaw clamp. Two center posts (with four shaft sizes) are provided for either bearing center or hub center wheels. When servicing bearing-center wheels use the center shaft C M that matches the bearing size of the wheel; 1/2", 5/8" or 3/4".
TSI new- CH-22 Ops Instr.pdf 5/5/2011 11:55:46 AM CH-22 MULTI-TIRE CHANGER INSTRUCTION-GENERAL S E C T I O N T W O Sliding clamps are positioned to proper wheel size as indicated by numerical marks on each arm. Pins are inserted 2.1 to the outside of clamps. Snug the 2 clamps against the pins. The adjusting clamp is positioned to a size larger than wheel C M to be serviced by rotating crank arm. Y CM MY CY CMY 2.2 K Wheel is placed in position.
Judy - CH-22 Ops Instr.pdf 5/4/2011 12:47:32 PM CH-22 MULTI-TIRE CHANGER INSTRUCTION-MOUNTING/DEMOUNTING S E C T I O N T H R E E It is important to use a good tire lubricant while mounting and dismounting, (Lube & Rust Inhibitor part #22.11007),and be sure that the bead is in the drop center of the rim during this process. In the unlikely event that you encounter difficulty in rotating the Mongoose easily use a small tire iron (#22.3877) to spoon the tire around at the point of greatest resistance.
Judy - CH-22 Ops Instr.pdf 5/4/2011 1:26:23 PM CH-22 MULTI-TIRE CHANGER 8.2010 C M Y CM MY CY CMY K Repair Parts No. 1. 2. 3. 4. 5. 6. 7. Part No. Screw Anchor Weld Mongoose Tire Tool Jaw Weld Jaw Frame Adjusting Weld Jaw Frame Weld Threaded Rod Assembly Pin, Cotterless 1/4 x 1-1/4 Qty REF 1 2 REF 1 1 2 Description 6024 CH.4 22.10063 22.10065 22.11062 22.41002 22.144 8. 9. 10. 11. 12.
Judy - CH-22 Ops Instr.
