Material Safety Data Sheet

9503 Odor Eliminator & Air Purifier
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
31/10/2013
EN (English US)
2/5
5.2. Special hazards arising from the substance or mixture
No additional information available
5.3. Advice for firefighters
Firefighting instructions
:
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Avoid (reject) fire-fighting water to enter environment.
Protection during firefighting
:
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:
Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment
:
Equip cleanup crew with proper protection.
Emergency procedures
:
Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Precautions for safe handling
:
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation of
vapor.
7.2. Conditions for safe storage, including any incompatibilities
Storage conditions
:
Do not store above 120°F. Avoid Extreme heat, open flames or sparks.
Incompatible materials
:
Strong oxidizers.
7.3. Specific end use(s)
No additional information available
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
8.2. Exposure controls
Personal protective equipment
:
Avoid all unnecessary exposure.
Hand protection
:
In case of repeated or prolonged contact wear gloves. The use of gloves impervious to the
specific material handled is advised to prevent skin contact. Suggested protective material:
Nitrile, 4.5 mil thickness, tested at 3.5 ml and above with no breakthrough time after 240 minutes.
Eye protection
:
Chemical goggles or safety glasses.
Respiratory protection
:
In case of insufficient ventilation, wear suitable respiratory equipment.
Other information
:
Do not eat, drink or smoke during use.
SECTION 9: Physical and chemical properties
9.1. Information on basic physical and chemical properties
Physical state
:
Liquid.
Appearance
:
Opaque.
Color
:
Milky white.
Odor
:
Floral.
Odor threshold
:
No data available
pH
:
No data available
Relative evaporation rate (butyl acetate=1)
:
< 1
Melting point
:
No data available
Freezing point
:
No data available
Boiling point
:
> 38 °C
Flash point
:
No data available