AI - 837-00 JULIENNE CRIB Scan the QR code to register your product https://www.evolurbaby.com/customer-care/product-registration/ ASSEMBLY INSTRUCTIONS Model shown is example only.
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e Adult assembly required. Small parts may present choking hazard prior to assembly. that you follow the steps below: 1. Please read the instructions thoroughly 2. Identify all parts and hardware 3. You may need to provide the following tools: Philips Head screw driver Flat head screw driver Hammer Do Not Use Power Drills Or Drivers To protect your parts during assembly please please place them on a soft surface.
WARNING! Should this product become damaged, and/or components are broken or missing, DO NOT USE LIMITED WARRANTY * Evolur warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. * This warranty covers 1 year from the date of original purchase. * This warranty is valid only upon presentation of proof of purchase. * This is solely limited to the repair or replacement of defective furniture components and no assembly labor is included.
WARNING! FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. TO REDUCE THE RISK OF SIDS, PEDIATRICIANS RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACKS TO SLEEP, UNLESS OTHERWISE ADVISED BY YOUR PHYSICIAN CHECK THIS PRODUCT FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR . SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE. DO NOT USE THIS CRIB IF ANY PARTS ARE MISSING, DAMAGED OR BROKEN. CONTACT ÉVOLUR - 1532 S.
MISE EN GARDE ! * LE NON-RESPECT DES AVERTISSEMENTS ET DES INSTRUCTIONS D'ASSEMBLAGE PEUT CONDUIRE À DES BLESSURES GRAVES OU À LA MORT. * POUR RÉDUIRE LES RISQUES DU SYNDROME DE LA MORT SUBITE DU NOURRISSON, LES MÉDECINS PÉDIATRES VOUS RECOMMANDENT DE PLACEZ SUR LE DOS LE BÉBÉ PENDANT LE SOMMEIL, EXCEPTÉ DANS LES CAS OÙ VOTRE MÉDECIN ÉMET UN AVIS DIFFÉRENT.
WARNING Do not use this crib if you cannot exactly follow the accompanying instructions Do not use this crib for a child who can climb out of it or who is taller than 90 cm Do not place in or near this crib any cord, strap or similar item that could become wrapped around a child’s neck Do not place this crib neat a window or a patio door where the child could reach the cord of a blind or curtain and be strangled Ensure that the sides of this crib are properly latched or locked in appropriate position where
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e 7 5 6 1 3 2 AI-837-00 4
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e HARDWARE AND TOOL DIAGRAM A B E BULLETIN # AI-837-00 C 4 x (3-1/8”) D x 4 (2") x 6 (2-1/2") H 4 X1 X4 X 4 (5/8”)
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e STEP (ÉTAPE) 1 A 3 A 1 A 2 A A BULLETIN # AI-837-00 4 x (3-1/8”) 5
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e STEP (ÉTAPE) 2 5 4 B BULLETIN # AI-837-00 x 4 (2") 6
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e STEP (ÉTAPE) 3 6 3 C D 7 D BULLETIN # AI-837-00 C X 4 (5/8”) 7 X4
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e STEP (ÉTAPE) 4 E BULLETIN # AI-837-00 x 6 (2-1/2") 8
A S S E M B LY I N S T R U C T I O N S - I n s t r u c t i o n s p o u r l ' a s s e m b l a g e Day Bed Conversion WARNING WHEN CONVERTING THIS CRIB TO A DAY BED, STABILIZER BAR MANUFACTURED BY ÉVOLUR INC., MUST BE USED. In order to convert your crib to a day bed, you must first remove the front rail of the crib, then attach the stabilizer bar, using the bolts from the front rail removal. NOTE: Make sure the mattress support is in the lowest position.
Toddler Bed Conversion WARNING WHEN CONVERTING THIS CRIB TO A TODDLER BED, A GUARD RAIL AND STABILIZER BAR MANUFACTURED BY ÉVOLUR INC., MUST BE USED. In order to convert your crib to a toddler bed, you must first remove the front rail of the crib, then attach the guard rail using the bolts from the front rail removal. NOTE: Make sure the mattress support is in the lowest position. Please follow the complete instructions that come with the guard rail which is sold separately.
Full Size Bed Conversion Bed Rails (Not Included, Sold Separately) BULLETIN # AI-837-00 11
WARNING! For Toddler Bed Use FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH FROM ENTRAPMENT OR STRANGULATION. DO NOT PLACE BED NEAR WINDOWS WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE A CHILD. THE MATTRESS INTENDED FOR USE ON THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS HAVING THE DIMENSIONS OF 51-5/8 IN (1310 MM) IN LENGTH AND 27-1/4 IN (690 MM) IN WIDTH AND THICKNESS OF 4 IN (100 MM) OR A GREATER THICKNESS AS SPECIFIED BY THE MANUFACTURER.
Follow us on @evolurbaby @EvolurBaby to get your nursery featured on our social media. Enter our monthly giveaway! Chat with us! Simply scan the QRcode to register. For any questions or concerns or feedback.
