Phau Ntawv Qhia

2
3
4
*Revised April 15, 2019
HOW TO ASSEMBLE YOUR
Follow these
SIMPLE STEPS
NO tools required
Quick assembly
WHAT’S INCLUDED
a. (1) Commode
frame with seat
and lid
Item # 8900W
Capacity not to exceed 300 lb
DROP ARM COMMODE
Place commode on front side.
Depress push buttons on backrest,
and insert into the backrest receivers
located on the bottom of the seat
platform. Ensure push buttons are
fully engaged and check by pulling
upward (see Figure 1).
To lower the drop arms, push
in the red spring-loaded
release button and swing drop
arm down (see Figure 3).
To raise the drop arms, swing
drop arm up until the red
spring-loaded release button
completely pops out and is
locked (see Figure 4).
a. b. c. d.
1
Adjust the height of the legs by
depressing the push button on each
leg and sliding the legs up or down
to desired height (see Figure 2).
NOTE: Legs must be adjusted to
same height so commode sits level.
Figure 2
Figure 1
Figure 4
Figure 3
b. (1) Backrest
c. (1) Bucket with lid
d. (1) Splash guard