Manualshelf

Phau Ntawv Qhia

ManualsBrandsTshav Pob ManualsEnclosureHEATSTRIP THH3200AR Flush Mount Enclosure
12345678
4
Installation Location
The diagrams below and on the following page give the minimum clearances required for the installaon of the Flush
Mount Enclosure.
It is imperave that all cables, insulaon and other materials are kept clear of the back and the sides of the Flush Mount
Enclosure. The enclosure has a number of openings for venlaon and air movement into the ceiling space; these openings
must not be covered. The enclosure shall, under no circumstances, be covered with insulang material or similar material.
It is recommended to use only the provided holes in the ends of the enclosure for mounng.
Ensure all clearances detailed in the HEATSTRIP Classic (In-Built Remote) PRODUCT MANUAL are strictly followed. The
diagrams below shows the general locaon constraints.