Tus neeg siv phau ntawv

ManualsBrandsTshav ntuj ManualsSNP SeriesSUNNY SNP Series Self-Contained Emergency Light

LED AC Power Will turn on indicating that the

unit is receiving power.

LED Charge/Fully Charge will indicate if the battery is charging.

Switch On/Oﬀ Use to turn the lamp on or oﬀ

(while the unit is not plugged in

Switch Test Use to test the unit

(while there is no power outages)

1. Using independent switches, the lamps are able to be turned on and oﬀ separately.

During power outages only 1 lamp can be used to double the operational time of the

battery.

2. Using high quality LEDs with a lifetime of over 50,000 hours, providing bright and

constant illimitation throughout its operation.

3. Equipped with a battery checker circuit to prevent the battery from running down

completely and extending its life.

4. The casing is made from 1 mm thick Electro-Galvanized steel coated with Epoxy

Powder and Stove Enamel making it highly resistant to rust.

USER MANUAL

Self-Contained Emergency Light SNP Series

Status Indicators and Testing Buttons

Features

Summary of content (4 pages)

PAGE 1
USER MANUAL Self-Contained Emergency Light LED AC Power LED Charge/Fully SNP Series Will turn on indicating that the unit is receiving power. Charge will indicate if the battery is charging. Switch On/Oﬀ Use to turn the lamp on or oﬀ (while the unit is not plugged in Switch Test Use to test the unit (while there is no power outages) Status Indicators and Testing Buttons Features 1. Using independent switches, the lamps are able to be turned on and oﬀ separately.
PAGE 2
Installation and Operation 1. Check if the electric socket is providing 220Vac power. If not please make sure it does before moving on to the next step. 2. Install or hang the unit in a location where emergency illumination is required. Make sure the unit is installed securely to prevent any possible accidents. 3. Turn the ON/OFF switch to the on position for both lamps. Both lamps should turn on. 4.
PAGE 3
Initial Trouble Shooting Cause Problem What to do - Power not getting to the unit - The power socket might not have after plugging in. any power. The LED AC light does not - The plug or socket is loose. turn on. - The AC.220V fuse is blown. - Emergency light does not turn on after the power went out. - Emergency light only turns on for a short time after the power went out. - Check the 220VAC power supply. - Check the plug and socket. - Contact customer service. -The unit is not plugged in.
PAGE 4
Terms for Warranty and Service 1. The product will only be under warranty if the customer ﬁlls in the “warranty card” and return the “return part” to the company within 7 days of purchasing the product. If this is not done within the speciﬁed time then the warranty will be considered void. 2. The warranty only covers the unit’s internal parts for the duration speciﬁed by the company counting from the date of purchase. 3.