HYDRO WATER ROWING MACHINE SF-RW522073 USER MANUAL IMPORTANT! Please retain owner’s manual for maintenance and adjustment instructions. Your satisfaction is very important to us, PLEASE DO NOT RETURN UNTIL YOU HAVE CONTACTED US: support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669).
IMPORTANT SAFETY INFORMATION We thank you for choosing our product. To ensure your safety and health, please use this equipment correctly. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained and used properly. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions. 1.
PRE-ASSEMBLY CHECK LIST 1 7 3 4 31 A 105011 Hardware Package Step 1 M8*15(1)-4PCS Step 2 M8*15(2)-4PCS Step 3 M8*15(3)-8PCS B C D 71 24 35 No. 1 7 3 4 31 A B C D 71 24 35 Description Main Frame Slide Rail Front Stabilizer Rear Stabilizer Seat Hardware Package User Manual Thank You Card AAA battery Water Purification Pumping Siphon Stopper Spec. 2 Tool:S4\S5 -1PCS Qty.
HARDWARE PACKAGE SF-RW522073 HARDWARE PACKAGE STEP 2 STEP 1 #51 M8*15 4PCS STEP 3 #51 M8*15 4PCS S17 #70 S13, S14, S17 1PC S13 #69 S4 1PC S14 #68 S5 1PC #51 M8*15 8PCS Ordering Replacement Parts (U.S.
ASSEMBLY INSTRUCTIONS We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877907-8669). #51 M8*15 4PCS #68 S5 1PC 51 35 30L 7 51 4 Attach the Rear Stabilizer (No. 4) to the Slide Rail (No. 7) by using 4 Screws (No. 51) to pass through the Stopper (No. 35) and the Rear Stabilizer (No. 4). Tighten with Allen Wrench (No. 68).
We value your experience using Sunny Health and Fitness products. For assistance with parts or troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-907-8669). #51 M8*15 8PCS #68 S5 1PC 51 31 1 51 35 51 7 STEP 4: Attach the Slide Rail (No. 7) to the Main Frame (No. 1) using 8 Screws (No. 51). Insert all 8 Screws (No. 51) partially into the holes first, and then tighten with Allen Wrench (No. 68). NOTE: The two holes must be threaded with the Stopper (No.
HOW TO FILL AND EMPTY THE TANK 1. Remove the Fill Plug (No. 18) from the Upper Tank Cover (No. 13). 2. To fill the tank with water, refer to Fig. A. Insert the Pumping Siphon (No. 24) into the tank, then use the Pumping Siphon (No. 24) and a bucket to fill the tank. Use the water level gauge on the side of the tank to measure desired water level in the tank. 3. To empty the tank, refer to Fig. B. Place a bucket next to the rower, and use the Pumping Siphon (No.
BATTERY INSTALLATION & REPLACEMENT 67 67-1 I BATTERY INSTALLATION: 1. Take out 2 AAA batteries from the PE bag. 2. Press down on the buckle of battery cover on the back of the Meter (No. 67), then remove battery cover. 3. Install 2 AAA batteries into the battery case on the back of the Meter (No.67). Pay attention to the battery + and – poles before installing. 4. Press down on the buckle of battery cover, then put the battery cover back to the back of the Meter (No. 67).
ADJUSTMENTS GUIDE MOVING THE BALANCE Rotate the Adjustable End Caps (No. 30L/R) on the Rear Stabilizer (No. 4) of the rower if the rower is unbalanced during use. CAUTION! Moving parts, such as the seat, can crush and cut the hands. Keep hands clear of the Slide Rail (No. 7) during use or when moving the rower. 31 7 30L 30R 4 MOVING THE ROWER To move the rower, lift up the Rear Stabilizer (No. 4) until the transportation wheels on the Front Stabilizer (No. 3) touch the ground.
EXERCISE METER T IM E COUNT T /5 0 0 M D IS T A N C E SPM C A L O R IE S TO TA L C O U N T ■KEY FUNCTIONS： Pressing the MODE key to select and lock on a function for following sequence: SCANTIME COUNT DISTANCE (DIST) CALORIES (CAL) TOTAL COUNT (TOT) SPMT/500M SCAN Pressing and hold the MODE key with 3 seconds to reset the value to zero (without TOT). ■SLEEP MODE： The system turns on when the MODE key is pressed or system sensed a signal input from the sensor.
APP CONNECTION: 1. Scan the QR code below to download the SunnyFit app onto your mobile device. 2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your free SunnyFit account and log in. 3. Ensure that the Bluetooth function is turned on from your mobile device. 4. To connect the equipment to the SunnyFit app: a. From the “Workout” tab, press on the “Search” button to search for your equipment. b.
EXPLODED DIAGRAM 1 31 27 37 6 48 6 49 27 51 51 51 66 1 11 51 66 62 37
EXPLODED DIAGRAM 2 59 22 5 73 72 10 52 43 53 16 75 44 19 71 11 75 70 17 69 18 57 24 23R 43 23L 54 55 52 21 61 36 2 64 68 26 67 9 74 32 64 25 13 32 64 40 40 50 8 45 50 36 15 64 45 14 76 50 38 20 65 64 56 38 60 34 12 1 63 50 39 46 19 51 54 64 47 39 35 51 29 28 58 41 3 58 42 47 46 7 51 33 51 35 51 51 30R 4 51 58 30L 58 12
PARTS LIST No. Description Description Spec. 1 Main Frame 1 39 PVC Sleeve 2 PVC/Ø16*Ø10.2*6.5 2 2 Up Frame 1 40 Plastic Shaft Sleeve PP/Ø18*Ø10.2*13 2 3 Front Stabilizer 1 41 Front Left Footrest 74*68.5*18 1 4 Rear Stabilizer 1 42 Front Right Footrest 74*68.5*18 1 5 Fixed Plate 1 43 Handlebar Cap PP/25*1.
