Tus neeg siv phau ntawv

USER PROGRAM

Program Profile (P21-P24)

The 4 user programs allow the user to set their own program that can be used immediately.

SETTING PARAMETERS FOR USER PROGRAM

1. Select the User Program using the UP or DOWN button then press ENTER button.

2. TIME will flash so the value can be adjusted using the UP or DOWN button.

3. Press the ENTER button to save the values and move to the next parameter to be adjusted.

NOTE: If you set up the target time to work out, then the next parameter of DISTANCE

cannot be adjusted.

4. Continue through all desired parameters.

5. After finishing the setup of the desired parameters, level 1 will flash. Use the UP or DOWN

button to adjust, then press the ENTER button until finished. (There are 10 times total). Press

the START/STOP button to begin the workout.

NOTE: Once the workout parameter counts down to zero, it will beep and stop the

workout automatically. Press the START/STOP button to continue the workout to reach

the unfinished workout parameter.

APP CONNECTION:

1. Scan the QR code below to enter the app store and download the SunnyFit app to your

mobile phone.

2. Ensure that the Bluetooth function is turned on from your phone.

3. If this is your first time using the SunnyFit app, follow the in-app instructions to register for

your free SunnyFit account and log in.

4. To connect the equipment to the SunnyFit app:

a. From the “Workout” tab, press on the “Search” button to search for your equipment.

b. Once your equipment appears on the list, tab on the “Select” button.

c. NOTE: If your equipment does not appear on the "Searching for Equipment" list, check the

EXERCISE METER on your equipment to ensure that it is not in sleep mode and your phone's

Bluetooth function is on, then tap "Retry" to search again.

d. Once your equipment shows up on the “Workout” tab as “Currently Selected”, your equipment

is now ready to display, track, and record your equipment’s workout stats on the app!