Tus neeg siv phau ntawv

9
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at [e-mail] or 1-877-90SUNNY
(877-907-8669).
STEP 6:
Remove 4 Phillips Screws (No. 74)
from the Meter (No. 68) by Spanner
(No. 116).
Plug the Pulse Wire (No. 72) to the
designed socket at back of the Meter
(No. 68). Then Connect the Sensor
Extension Wire 2 (No. 70) with Meter
Wire A (No. 68a).
Attach the Meter (No. 68) to the bracket
of Handlebar Post (No. 2) with 4
Phillips Screws (No. 74) that were
removed. Tighten and secured with
Spanner (No. 116).
NOTE: To avoid damaging the wires,
please put them into the Handlebar
Post (No. 2) before attaching the Meter
(No. 68) onto the bracket.
Remove 2 Phillips Screws (No. 25)
and 2 Flat Washers (No. 28) from the
Handlebar Post (No. 2) by Spanner
(No. 116). Then attach the Bottle
Holder (No. 41) to the Handlebar Post
(No. 2) with 2 Phillips Screws (No. 25)
and 2 Flat Washers (No. 28) that were
removed. Tighten and secured with
Spanner (No. 116).
Insert the jack from Adaptor (No. 71) to
adaptor input on the front of Main
Frame (No. 1), then plug the Adaptor
(No. 71) into an outlet.
The assembly is complete!