Tus neeg siv phau ntawv

ManualsBrandsTshav ntuj ManualsEDLS SeriesSUNNY EDLS09-2R EDLS Series Emergency Downlight

EDLS09-2R

EDLS09-2C

USER MANUAL

1 .Model EDLS09-2R is designed to be embedded in the ceiling / Model EDLS09-2C is designed

to be hung on the ceiling.

2. Connect the electrical cable on the INPUT side to a 220Vac/50Hz mains power supply.

The orange LED AC should turn on to indicate the unit is receiving power.

3. Install properly and securely to prevent accidents that could cause damage to the unit or other

people and property.

4. Press the ON switch located on the unit’s lamp to turn the unit on. The green LED ON

should turn on to indicate the unit is operational.

5. The unit should illuminate automatically during a power outage. Once normal power has

returned, the unit will continue to illuminate for another 3-5 seconds before turning oﬀ.

Installation and Operation

1. The emergency lighting unit should be installed indoors, out of direct sunlight and humidity.

It should not be installed in environment with temperatures higher than 40 degrees Celsius.

2. Always press the "ON" switch every time after installation to turn on the unit.

3. When the unit is not in use always turn it oﬀ by pressing the "OFF" switch.

4. The unit should be stored in temperatures under 25 Degree Celsius and the battery should be

charged every 3 months to maintain its operational life.

5. Please always read the manual carefully prior to operating the unit for the saftest and most

eﬀective use of the product.

Caution: Please always read the manual prior to installation and operation.

Important Note on Using the Unit

Emergency Downlight EDLS Series

Summary of content (4 pages)

PAGE 1
USER MANUAL Emergency Downlight EDLS09-2R EDLS Series EDLS09-2C Installation and Operation 1 .Model EDLS09-2R is designed to be embedded in the ceiling / Model EDLS09-2C is designed to be hung on the ceiling. 2. Connect the electrical cable on the INPUT side to a 220Vac/50Hz mains power supply. The orange LED AC should turn on to indicate the unit is receiving power. 3. Install properly and securely to prevent accidents that could cause damage to the unit or other people and property. 4.
PAGE 2
Indicators Auto Test Indicate that the unit is set to perform automatic self-tests LED Charge Indicate the battery charging status LED On Indicate that the unit is receiving a power LED AC.
PAGE 3
Auto Test Button for testing the device's function for 5 seconds. Button for testing the device's function for 30 seconds. Button for testing the device's function for 60 seconds. Button for turning on auto battery test system Button for turning oﬀ auto battery test system Button for canceling the test The battery test is performed to help extend the operational lifetime of the battery, it will also test that the unit is in good condition and ready for operation.
PAGE 4
Terms for Warranty and Service 1. The product will only be under warranty if the customer ﬁlls in the “warranty card” and return the “return part” to the company within 7 days of purchasing the product. If this is not done within the speciﬁed time then the warranty will be considered void. 2. The warranty only covers the unit’s internal parts for the duration speciﬁed by the company counting from the date of purchase. 3.