User's Manual

3.11. Wireless LAN WEP Setting
3.11.1. Set WEP Key Index
AT+WWEPINDEX=n
n=1~4
Return status
3.11.2. Set WEP Key
AT+WWEPKEYn=<key>
n=1~4
<key> is 10 or 26 hexadecimal digits (or empty to clear the current setting)
Return status
3.12. WPA2 Setting
3.12.1. Set WPA2-PSK Key
AT+WWPA2PSK=<key>
<key> is 8~63 ASCII characters or a 32-byte key formatted as an ASCII
hexadecimal number.
Return status
3.12.2. Set AP Mode WPA2-PSK Key
AT+WAPWPA2PSK=<key>
<key> is 8~63 ASCII characters or a 32-byte key formatted as an ASCII
hexadecimal number.
Return status
3.12.3. Set WPA2-EAP Identity
AT+WEAPIDENTITY=<name>, < password >
Return status
3.12.4. Set WPA2-EAP Method
AT_WEAPMETHOD=n
n=0: EAP-TLS
n=1: PEAPv0 with EAP-MSCHAPv2
n=2: EAP-TTLS with EAP-MSCHAPv2
Return status
3.12.5. Set WPA2-EAP Certificate File (*.pem)
AT+WEAPCERT=<Type>, <Size>, <Data>
Type: “0” -> CA Certificate File
“1” -> Client Certificate File
“2” -> Client Private Key File
Size is in unit byte
Return status
3.13. Firmware Update Mechanism
3.13.1. Module Firmware Upgrade
AT+MFIRMWARE=<file size>,<file content>
Return status
*Return “Failed” if firmware checksum error, otherwise “OK”.
3.13.2. FTP Server Check Request
AT+MFTPCHECK= <FTP Server IP (or server name)>, <ID>, <Password>,
<Directory>, <Printer_Version>