User Manual

There are two stop positions for the top cover. Position 1 and 2 are indicated on the

label below.

Note: To hold the cover open at position 1, you must lift the cover higher than

the stopping point at position 1 and gently lower the cover to stopping point 1.

Do not let the cover free fall!

3. Fully open the top cover and gently lower it to stop position 2.

Fig. 1 Top cover support is fixed at position 2

4. To close the cover, lift up the top cover to the ultimate angle then close the top cover

gently and it will be kept at a stop position between 1 and 2 for a while. Use both

hands to gently push down the top cover to close it and make sure the cover is

latched on both sides.

Note: Do not place your hands between top cover and lower cover when

closing the top cover!