User Manual

- 2 -
1.2 Product Features
1.2.1 Printer Standard Features
The printer offers the following standard features.
Product standard feature
Direct thermal printing
Reflective sensor – Black mark sensor
(position selectable – right/left/center position-factory adjustment , default –
center position , black mark in back side)
Transmissive sensor – Gap sensor
Head open sensor
Peeler sensor
2 operation buttons (On/off and feed)
3 LEDs for printer status, 3 LEDs for battery status
USB 2.0 (full speed) interface
Class 2 Bluetooth 2.1 module
32 MB SDRAM memory
16 MB FLASH memory
Micro SD card reader for memory expansion up to 4G (max.)
DC 7.4V/5760 mAh Li-ion rechargeable battery
Real time clock
Powerful 32 bit 200 MHz RISC processor
Eltron
®
EPL and Zebra
®
ZPL emulation languages support
Internal 8 alpha-numeric bitmap fonts
Internal Monotype Imaging
®
true type font engine with one CG Triumvirate Bold
Condensed scalable font
Fonts and bar codes can be printed in any one of the four directions (0, 90,180,
270 degree)
Downloadable fonts from PC to printer memory
Downloadable firmware upgrades
Bar code, graphics/image printing
Supported
bar code
Supported image
1D bar code 2D bar code
BITMAP, BMP, PCX
(Max. 256 colors
graphics)
Code 39, Code 93,
Code128UCC, Code128 subsets
A,B,C, Codabar, Interleaved 2 of
5, EAN-8, EAN-13, EAN-128,
UPC-A, UPC-E, EAN and UPC
2(5) digits add-on, MSI,
PLESSEY, POSTNET, China
POST, GS1 DataBar
PDF-417,
Maxicode,
DataMatrix, QR
code, Aztec