User Manual

25
Printer configuration will be restored to defaults as below after initialization.
Parameter
Default setting
Speed
50.8 mm/sec (2 ips)
Density
8
Media Width
2.83” (72 mm)
Media Height
4” (101.5 mm)
Sensor Type
Black mark sensor (As paper end sensor)
Black Mark Setting
As paper end sensor
Print Direction
0
Reference Point
0,0 (upper left corner)
Offset
0
Serial Port Settings
9600 bps, none parity, 8 data bits, 1 stop bit
Code Page
850
Country Code
001
Clear Flash Memory
No
IP Address
DHCP