User Manual

NOTE: Secure the hook fastener strip in the
side rail to the sewn Velcro
®
loop
fastener along the entire length of both
side rails before driving vehicle, to
prevent wind lift.
STEP 7: Secure the hook fastener and Velcro
®
loop fastener strips on one side rail by pressing along full length of rail. Pull cover tight across
pickup bed and secure fasteners on opposite side rail.
Hook fastener strip
located on the side rail.
Velcro
®
loop fastener
sewn to the cover.
LATCHING & UN-LATCHING COVER
STEP 6: Always close cover before closing tailgate.
Unroll cover toward tailgate and rest bows on side rails. Rotate header into header stops and press down to lock toggle into header.
lock toggle into header
header seal
inside tailgate
NOTE: If tailgate has a key lock, TruXedo
®
is secured until tailgate is
unlocked and opened.
header
cover
toggle
header seal
header stop
Pull cover over rails
toggle
Press edges
SECURING COVER TO THE SIDE RAILS WHEN CLOSED
SIDE RAIL & COVER INSTALLATION CONTINUED
r e l e a s e h e a d e r g u i d e
Detail D
STEP 5: Retract spring loaded header guides. Align header with side rail and release header guides for automatic engagement with side rail.
Check to assure header guides are fully engaged with side rail.
align WiTH Rail
h e a d e r g u i d e
reTraCT
Detail B
Detail C
SIDE RAIL
COVer aSSeMBLY