Installation Manual

8
6
___
3
___
fold back header and cover,
while holding side rail
in place (see step 8).
tighten clamp.
DO NOT
PLACE CLAMPS
DIRECTLY
UNDER CENTER
BOW
Tighten clamps at tailgate:
Tighten center clamps:
repeat on
o p p o s i t e
side rail.
check and
adjust as
needed.
open cover past
center bow. slide
clamps to tailgate
side of bow, then
tighten clamps.
leave 1/8” clearance
between tailgate header
and side rails.
top view
1/8”
1/8”
clamp
side rail
Tighten front clamps:
align
grooves in
clamp with
grooves in
side rail
center
side
rails
and
tailgate
header
on
pickup
bed
9
cover not shown
for clarity
Center side rails on pickup bed:
10
Install weather seal on tailgate
corner plugs:
corner
plug
weather
seal
P/N 1116032 Rev AD
TruXedo, Inc.
P.O. Box 1078, 2209 Kellen Gross Dr., Yankton, South Dakota 57078
Call Toll Free: 1-877-TRUXEDO (1-877-878-9336) Fax: [phone]
Visit Us Online: http://www.truxedo.com
7
install front clamps as
close to bulkhead as
possible. tighten.