Installation Manual

___
2
___
Set cover assembly on front bulkhead:
3
4
Align cover with pickup bed:
5
truxport
side rail
place three clamps on each
side rail to keep rails in place
parallel
to
bulkhead
Front
bulkhead
Place side rails on pickup bed rails. Assemble clamps.
Place rear clamps loosely over side rails & pickup
bed rails. Insert side rail corner plugs into header:
NOTE:
Additional weather seal may be required for pickups with bed caps, tailgate protectors, or liners.
Add weather seal if needed to seal appropriately.
pickup
bed rail
Install weather seal on cab end corner
plugs:
2
weather seal
corner plug
i
nsert
insert
rear clamp
P/N 1116032 Rev AD
TruXedo, Inc.
P.O. Box 1078, 2209 Kellen Gross Dr., Yankton, South Dakota 57078
Call Toll Free: 1-877-TRUXEDO (1-877-878-9336) Fax: [phone]
Visit Us Online: http://www.truxedo.com
center
on
bed
position
on
bulkhead
1
clamp
assembly
cab
Faces cab
Faces
tailgate
bulkhead
Fabric roll
INSERT IN
SHADED AREA
Place remaining clamps loosely over side
rails & pickup bed rails: