User Manual

B
B B
NOTE: If you have a locking
tailgate, truck bed cover is
secured until tailgate
is unlocked and opened.
11:
10:
A
A
A
B
1. Open tailgate
2. Pull latch on driver side to unlatch cover.
3. Roll Cover to front and secure with retainer straps.
13:
12:
CLOSING THE COVER CONT:
OPENING THE COVER:
Close tailgate, then cover
Tailgate
Note: Small wrinkles may be present after closing
cover for rst time. Remove wrinkles by pulling cover
material from each side. For best results have cover
unlatched. Relatch rear header after adjustments have
been made.
IMPORTANT:
Before driving vehicle, secure hook and
loop fastener by running your hand down
entire length of each X15 rail. This will
prevent wind lifting the cover and causing
damage.
SETTING HOOK AND LOOP FASTENER:
5
For cover to roll up evenly, make sure
control straps are evenly spaced on
driver and passenger side.
Control Straps
Rear Header
Tailgate