User Manual

7:
Note: The Pro X15 rail may need to be
tilted upward slightly to allow the screw
head to drop into oblong hole.
8:
Slide header guides into lock position.
LEFT
RIGHT
B
Unhook and roll cover to the tailgate.
9:
CLOSING THE COVER:
INSTALLING COVER ASSEMBLY:
Front
Front
LOCKING COVER ASSEMBLY TO RAILS:
In some instances, the rail may need
to be forced up slightly for the header
guide to slide into position under the
rails.
4
Slide until you hear a CLICK!
Position cover roll to the front near the cab. Rotate header and screw head into oblong hole as
shown.
After front header is locked into place, rotate the header stabilizer screws clockwise until the front
header is secured with no back and forth movement.
Driver Side Shown
Passenger Side Shown