User Manual

B
B
ATTENTION: LIP OF
X15 RAIL SITS
ON TOP OF TRUCK
BED RAIL.
Truck Bed Rail.
4:
REAR (Tailgate)
FRONT(Cab)
3/8”
Approx.
3/8”Approx.
Compress foam seals approximately 50%
Align rail so foam is compressed
equally on both sides.
B
Tighten clamps
securely on
X15 rails before
driving vehicle.
WARNING
!
LEVEL
5:
ADJUSTABLE
CLAMP
6:
Repeat steps 3-5 on passenger side for item C. Proceed to step 7 when complete.
Approx.
6-7in. on most
truck beds
It is recommended to close tailgate when positioning the rails.
INSTALLING Pro X15 RAILS CONT:
Approx.
6-7in. on most
truck beds
3
Adjust this part of the clamp upward
or downward to achieve a level rail.
LEVEL
For best results, rmly apply
downward pressure on rail while
tightening clamps.