Daim Ntawv Qhia Tus Neeg Siv

4 -EN TruVision DVR 17 Quick Start Guide
The recorder works with the following
browsers:
• Microsoft Internet Explorer (IE)
• Google Chrome (from version 45)
• Apple Safari (from version 10)
• Mozilla Firefox (from version 52)
To access the unit, open a web browser and
enter the IP address assigned to the recorder
as a web address.
Install the recorder web plug-in to see live
camera images.
In the logon screen, enter the user ID and
password.
Figure 4: Web browser interface (live view
shown)
The default values for recorder network
settings are:
• DHCP: Disabled by default.
• IP address - 192.168.1.82
• Subnet mask - 255.255.255.0
• Gateway address - 192.168.1.1
• Server Port: 8000
• HTTP Port: 80
• RTSP port: 554
• When using Google Chrome, Apple Safari,
or Mozilla Firefox - port in HTTP mode:
7681
Note: The following ports need to be
forwarded in the router to connect properly:
Server port and RTSP port.
OSD control
The recorder’s OSD does not provide full
access to all the functionalities available.
Refer to the user manual for more detailed
information.
Adding IP cameras
Refer to the user manual for detailed
information on how to add IP cameras to the
recorder.
Live view mode
Note: Ensure that you have installed the
recorder web plug-in to see live camera
images. If using Edge, refer to the technical
note “Using Edge browser with TruVision
devices” that is available from our web site. If
using Google Chrome, Apple Safari, or Mozilla
Firefox, click “Download Plug-in” on top right
of screen to download the plug-in for these
browsers.
Live mode is the normal operating mode of the
unit where you watch live pictures from the
cameras. There are several shortcut buttons
at the bottom of the screen to access
frequently used functions. See Figure 3 on
page 2 for a description of the functions
available.
Configuring the recorder
You can configure the recorder parameters
from the Configuration button in the menu
toolbar. When selected, it displays a submenu
panel that lets you edit a group of settings.
Most menus are available only to system
administrators.
The web browser lets you configure all the
functionalities of the recorder. The OSD has a
more limited access to the functionalities that
can be modified.
Refer to the recorder user manual for detailed
information on configuring the unit.