Instructions / Assembly

9
6
Assemblng the cylinder
□ Put the cylnder into the Gas Tank Support (K), and
secure the cylinder by tightening the screw in the
gas tank suppport. Connect the hose and regulator
to the cylinder.
A
ssembly (continued)
5
Assembling the door
□ Attach Door Knob (M) to Door Panel (J) using one (1)
M6*10 mm bolt (AA).
Please fully tighten all bolts at this time.
□ Orient the unit so that Table Top with Burner (G) is facing up.
Attach Door Panel (J) to Front Leg A (A) using one (1)
M6*20 mm bolt (EE), tighten the bolt using Wrench (FF).
□
AA
M
EE
NOTE: The propane cylinder is sold separately.
Use a standard 20 lb. propane cylinder only.
Put the hose away from the bowl base during
connect the propane cylinder.