Roof Top Tent Installation Manual
Anywhere You Want. SAFETY INFORMATION • Do not try and lift the RTT on your own; make sure to have at least 2 people, using proper lifting techniques. • Ensure that the RTT is installed correctly and that all connections, straps and surfaces are checked regularly for degradation and loosening. • Ensure that the roof rack or roof bars can support the full weight of the RTT (70kg) while in motion or supporting two adults.
Roof Top Tent Installation Manual Components Included in the kit: 1. Roof Top Tent 2. Telescopic Ladder 3. 8x Flat Brackets 4. 8x Bolts & Nuts 5. 2x Spanner Installation Instructions At least 2-3 people are needed to install the RTT. Do not try and lift and install our tent on your own.
Roof Top Tent Installation Manual 1. Lift the Rooftop Tent onto your vehicle’s roof rack. Position so that the weight is centered evenly over the roof. 2. Assemble 4 of the flat brackets with 2 bolts each.
Roof Top Tent Installation Manual 6 3. Locate the rails on the bottom of the tent. Slide 2 flat brackets with bolts along each rail located on the bottom of the tent. 4. Lift one side of the tent and align the brackets to the rack. Repeat with all four brackets.
Roof Top Tent Installation Manual 5. Insert the bottom brackets and tighten the nuts to secure to the crossbar. Once you are finished tightening all of the nuts, your rooftop tent is fully secured and ready for adventure.
trust-made.
