User Manual

The fan was working,
but suddenly tuned off.
The timer setting has
counted down to
automatic shut off.
Ensure all the timer lights on the
control panel
0.5H, 1H, 2H, 4H are off. If any of them
are lit, continue to press the timer
button until all the timer lights are
off. For more information see
"OPERATINGINSTRUCTIONS" section
for the TIMER
Oscillation function is
not working.
The oscillation function
has not been activated.
Ensure the indicator is lit. If it is
not, press the button to start the
oscillation function. This can be done
while the fan is operating.
Fan is on but air coming
out of it is not strong
enough.
There is dust built up at
the back of the fan.
Turn fan OFF and unplug. Using a soft,
dry cloth, wipe the back of the grille to
remove any dust build-up. Plug in unit
and turn fan back ON to resume
normal operation.
The remote control is
not working.
The batteries are weak.
Refer to OPERATING INSTRUCTIONS
regarding the
remote control on page 6. Guidelines
for using the remote control (one
CR2025 battery included) and
Guidelines for use of batteries.
The remote control is
too far from the main
fan.
The remote control is
not sending a signal to
the main fan.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE FAN YOURSELF. DOING So COULD VOID
THEWARRANTY AND CAUSE DAMAGE OR PERSONAL INJURY.