6” CONVERTIBLE FAN WITH REMOTE CONTROL MODEL: LDS33-40PE-RC OWNER’S MANUAL NOTE: FOR HOUSEHOLD USE ONLY. NOT INTENDED FOR COMMERCIAL USE. Thank you for choosing Trustech fan! This user manual will provide you with information for the proper care and maintenance of our product. Please take a few moments to read it thoroughly and start enjoying your cool summer! Always here to help you For any questions or help, please email us: Support@trustechproducts.
IMPORTANT INSTRUCIONS RULES FOR SAFE OPERATION Please read and understand all instructions before using this fan. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock, and injury to person or property, including: 1. Never insert objects such as fingers, pencils, etc., through the grille when the fan is running. 2. Disconnect fan from the electrical outlet when moving it between distance, or when removing its grilles or cleaning it. 3.
Fig.1 1. Front grille 2. Metal nut 3. Fan blade 4. Plastic nut 5. Rear grille with handle 6. motor shaft 7. Motor housing 8. Upper column 9. Remote holder 10. Control panel 11. Upper column knob 12. Power cord 13. Adjustable column (for pedestal fan) 14. Height adjustment locking nut (for pedestal fan) 15. Lower column (for pedestal fan) 16.
17. 18. 19. 20. 21. 22. Base Remote control Adapter (For table/floor use) Snapping lock pin Lock screw Fused plug ASSEMBLY OF BASE（Parts #8.#11.#13-17） For Pedestal Fan 1. Remove parts from packaging. Set the fan base (#17) on the floor. Insert lower column with adaptor (#16) into the base and secure them by turning the lower column clockwise. 2.
ASSEMBLY OF BLADE AND GRILLES（Fig.2 #1-7.#19.#20） Fig.2 Fig.3 1. Remove and discard the plastic sleeve on the motor shaft (#6). Position the rear grille (#5) against the front of the motor housing through the motor shaft (#6). Ensure the handle at the back of grille (#5) is facing up and that all guiding pegs on the motor housing are lined up with cutouts on the rear grille (#5). 2. Secure the rear grille (#5) with the plastic nut (#4).
4. Fit front grille (#1) against rear grille (#5) by aligning the alignment mark on the top of the grilles, closing them together by the hooks on front grille and slots on the rear grille, twisting the front grille clockwise to the lock position (see Fig. 3), the snapping lock pin (#19) should pop in. Note: to disassemble the front grille, gently pull the snapping lock pin outwards while twisting the front grille in a counterclockwise direction. 5.
BUTTON TIMER FUNCTION Pressing this button sets the timer in increments of 0.5 hours to a maximum of 7.5 hours. After the timer runs out, the fan will automatically shut off. Pressing this button to choose different patterns of breeze. SOLUTION 4 indicators (0.5H, 1H, 2H, 4H) on the panel will light up when you press the timer button. Total hours on the illuminated indicators are the total time that the timer will work before it shuts off. Example 1: When 0.
USING THE REMOTE CONTROL OPERATION IS SUBJECT TO THE FOLLOWING CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION OF THE DEVICE. For your convenience, the remote control features the same buttons as the fan control panel. Follow the operations in"USING THE CONTROL PANEL".
Dispose of the battery · The battery must be brought to a household hazardous waste collection site for proper handling. SETUP OPTIONS FOR IMPROVED AIR CIRCULATION This fan has 3 functions which will allow you to better customize your preferred air comfort as well as improve air circulation in the room. A. OSCILLATION: To activate the oscillation function for widespread breeze distribution, press the button. To turn off the oscillation function for a targeted breeze setting, press again.
CLEANING AND MAINTENANCE 1. Always disconnect the plug from the electrical outlet when cleaning your fan. 2. Light accumulated dust at the back grille of the fan may be removed with a soft cloth. 3. Wipe the exterior surfaces of the fan occasionally with a damp cloth (not dripping wet) and dry thoroughly with a soft dry cloth before operating the fan. 4. Do not use harsh cleaners or materials to clean this unit, doing so will cause damages to it.
Ensure all the timer lights on the control panel 0.5H, 1H, 2H, 4H are off. If any of them are lit, continue to press the timer button until all the timer lights are The fan was working, The timer setting has off. For more information see but suddenly tuned off. counted down to "OPERATINGINSTRUCTIONS" section automatic shut off. for the TIMER Ensure the indicator is lit. If it is Oscillation function is The oscillation function button to start the not working. has not been activated.
WARRANTY TRUSTECH warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
CONTACT US Thank you for choosing Trustech product. For any questions of your product or honor your warranty, Please scan the QR code below to get our [24-hour online vip service ]or write to [Support@trustechproducts.
