Instruction Manual
Table Of Contents
7
Using Methods
KPT-173ND Turn on the power switch in the back first,
“O”= OFF,“—”ON;
1. Turn on the power switch in the back, LED display “--”, the appliance is
standby; See picture 1.1
2. Press “ ”as follows: ON (only Fan working), LED display Environment
temperature(default is ℉ after the power cut off); OFF(Fan will keep working
for 30 seconds when shutdown the appliance after heating);See picture 2.1
3. Press “ ”, low heat(1000W), high heat(1500W), FAN working, See picture
3.1-3.2
4. Press “ ” to set a timer, 1h、2h.....12h; See picture 4.1-4.4
5. Press “ ”, SWING ON, SWING OFF, See picture 5.1
6. Press “ ” to set temperature, Temperature range: 50-95℉;see
picture 6.1-6.2
Press over 3s, switch to ℃, Temperature range: 10-35℃, See picture 6.3-6.4.
Press over 3s again, switch to ℉.
(The remote control can not switch the Temperature unit, only can switch on
the machine.)
7. The operation method of the remote control is the same
Note: The indicator lights when the corresponding function is working.
1.1
2.1
3.1
3.2
4.1
4.2
4.3
4.4
5.1
6.1
6.2
6.3
6.4
/
/