ONLINE HANDLEIDING www.trust.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION Index 1. Add a room 5 1.1 Edit/Delete room 6 2. Connect a ZigBee bulb 7 2.1 Connect a ZigBee Remote 11 2.2 Edit/Delete a device 13 3. Add scenes 14 3.1 Add/Delete action 15 3.2 Add/Delete delays 16 4 Configure timers 17 4.1 Edit/Delete timers 20 5.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 1 1.1 A A C D B B C 1. Add a room 1.1 Edit/Delete room A Press the + button at the top of the screen to add a new room A To edit the name of a room press the pencil button at the top of the screen B Fill in a name for the room you want to add. B Press on the room name to begin editing. C Press the ADD button to save the new room C When you are done editing the name press the CONFIRM button.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 2 A B E E C D 2. Connect a ZigBee bulb Make sure the ZigBee bulb is close to the Control station (Within 4 metres) E Select Trust Smart Home ZigBee Line and choose for ZigBee light F Put the bulb in connect mode. (Check the manual of the bulb on how to put it in connect mode) A Press on a room name to open it. B Press the + button at the top of the screen to add a new device.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION L H I J K G G When the ZigBee device is in connect mode press CONNECT. H The bulb is now added to your room. You can now control the bulb with the App. I Use the buttons to control the device. 9 J To change the color of a ZigBee bulb press on the color circle to open the color palette (Only for RGB or Cold/Warm bulb) K Choose the desired color. L Press the BACK button to go back to the room.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 2.1 Arm 5 A C D B 2.1 Connect a ZigBee remote First reset your ZigBee remote before you connect it to the Z1. (Check the manual of the ZigBee remote on how to reset it) A Add a new device (See chapter 2) and choose for ZigBee Remote control B Press CONNECT in the App D The ZigBee Remote is now connected To control a bulb which is already connected with the Control station with the remote the bulb also needs to be connected to the ZigBee Remote.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 2.2 3 B D B A C E C D A 2.2 Edit/delete device 3. Add scenes A To edit the name of a device first open the room which contains the device. With a scene you can trigger different devices at the same time or with an delay. B Press the pencil button the enter edit mode. A Press the scene button in the menu bar C Press on the device name to begin editing. B Press the + button at the top of the screen to add a new scene.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 3.1 3.2 E D C D C A F A B B E F 3.1 Add/delete actions A Press the ADD ACTION button to add actions to the scene. B Add the desired actions for the devices by pressing the buttons. C Press CONFIRM to add the actions to the scene. D By pressing the pencil button you enter edit mode. E Delete an action by pressing the DELETE button. F Press CONFIRM again to save the scene. 15 3.2 Add/delete delays It is possible to add a delay between actions.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 4 B E C F G D 4 Configure timers With a timer you can trigger one or multiple devices on a fixed time, Sunrise or Sunset. E Choose the kind of start time for the timer. (In this example a fixed time is used) A Press the Rules button in the menu bar F Select the desired start time for the timer and press NEXT. B Press the + button at the top of the screen to add a new timer. G Choose which days and in which months the timer should be triggered.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 4.1 N I K L M J O H H Choose the desired actions for when the timer is triggered. Press NEXT I A message appears asking if you want to add a timer to turn the devices OFF. Press Yes J Select the time you want the devices to be turned OFF. Press NEXT K The timers have been added to the overview. 19 4.1 Edit/delete timer L Press the pencil button the enter edit mode. M Press on the timer name to begin editing.
Z1 ZIGBEE CONTROL STATION Z1 ZIGBEE CONTROL STATION 5 A C B MAC: 00-00-A2-00-12-11 5. Connect manually A When there is no Z1 found, it is possible to enter the MAC address manually during the registration process. Press the MANUAL button B Look at the bottom of the Z1 for the MAC address. C Press the “Enter manually” field and enter the MAC address for your Z1.