Instruction manual

TRUST DIRECT WEBSCAN 19200
8
7. For ‘File type’ (C), give a file format for the image to be scanned (see figure
3).
Note: If you wish to scan an image with 48 bit colours, the ‘TIF’ file
format must be selected for ‘File type’ (C). This is the only format
which can handle 48 bit colours.
8. Click on ‘Acquire’ (D) to open the scanner’s TWAIN interface window (see
figure 3).
9. In the TWAIN interface window, click on ‘Preview’ to make a preview scan of
the image on the glass plate. This will now be visible in the right-hand window
(see figure 4).
10. A dotted line will automatically appear on the preview scan of the image. This
is the area that will be used when the scan is made. You can also select an
area to be scanned by dragging the mouse over the preview scan (keep the
left mouse button pressed).
11. Alter the settings in the left-hand window as required and then click on ‘Scan’
to scan the selected area with your settings. See chapter 5.3 for the various
TWAIN settings.
12. Close the TWAIN interface window when the scan has been made. The
scanned image will be automatically sent to the editing window of Photo
Express. Double-click on the scanned image to edit it.
13. Click on ‘Edit’ at the top of the main menu of Photo Express. The three
submenus ‘Adjust’, ‘Selection’ and ‘Test’ will appear, in which you have
various options for editing your image.
14. After the image has been edited, you can print it by clicking on ‘Print’ at the
top of the main menu of Photo Express and then selecting ‘Normal’.
Note: You must have a printer installed on your computer to use the
‘Print’ option.
15. Click on ‘Share’ at the top of the main menu of Photo Express and select
‘Save’ to save the edited image.
16. In the left-hand window of Photo Express, give the location (A), file name (B)
and the file format (C) and then click on ‘Save’ (D) (see figure 5).
You have now made a scan. See the Ulead Photo Express instruction manual for a
detailed explanation of the possibilities available with this program.
5.3 TWAIN settings
The TWAIN interface window contains a number of buttons (see figure 4). See the
table below for a description of the buttons.
Button Function
Cropping tool Selects an area in the preview window.
Zoom Increases or decreases the size of the image
in the preview window.
Batch scan Makes a number of scans from different areas
of the document. You can scan up to 10
selected areas at the same time.
Language Sets the language for the TWAIN window.
Help Information about the scanner and the
software functions.