Instruction manual

TRUST DIRECT WEBSCAN 19200
4
10. After the installation, click on ‘Finish’ to complete the installation process.
You have now completed the installation of Ulead Photo Express 4.0. Continue to
the next chapter.
3.5 Connecting the DIRECT WEBSCAN 19200
Note: A USB device is ‘hot-swappable’. This means that the device
can be connected and disconnected from your computer whilst
your computer is turned on.
Note: During installation in Windows 2000 and Windows XP, you may
receive a message saying that the driver has not been signed.
This does not cause a problem for the functionality. If you
register at www.trust.com/12389, you will be informed as soon
as a signed driver is available.
Connect the scanner after the software has been installed.
1. Start Windows.
2. Connect the scanner’s USB plug to a free USB port on your computer.
3. New hardware will be detected and the scanner will be automatically
installed.
4. In Windows XP, select the option to automatically search for the best driver.
Make sure the Trust installation CD-ROM is inserted into your CD-ROM drive.
5. Windows XP will find the drivers. Select the ‘Trust Direct Webscan 19200’
driver in the ‘WinXP’ folder on the Trust installation CD-ROM and click on
‘Next’.
6. If the driver has not been signed, click on ‘Continue Anyway’ in the next
window. This message will not be displayed if the driver has been signed.
7. Click on ‘Finish’ to complete the installation.
Your scanner is now ready for use.