manual

ManualsBrandsTrust Manualscomputer components4 Port E-mail USB Hub

TRUST 4 PORT EMAIL USB HUB

1 Introduction

This manual is intended for users of the ‘Trust 4 Port Email USB Hub‘. With the Trust

4 Port Email USB Hub you can expand the number of USB ports of your computer in

a simple manner. The Email USB hub also is has internal melodies and indicator

LEDs that, in combination with the enclosed software, notify you when you receive

new e-mail.

2 Safety

Before using, please read the following instructions carefully:

1. Do not use this device in damp environments such as bathrooms, swimming

pools, etc.

2. Do not try to repair the device yourself. Have the device repaired by qualified

personnel.

3. Position the device so that the cables cannot be damaged.

3 Installation

For installation of the Trust 4 Port Email USB Hub, please follow the steps below:

3.1 Connecting the USB Hub

1. Start your computer.

2. Connect the connector plug of the enclosed power adapter to the power

connection of the 4 Port Email USB Hub.

3. Plug the power adapter into the power outlet.

4. Connect the USB connector plug of the enclosed USB cable to the USB

connection of the 4 Port Email USB Hub.

5. Connect the other end of the USB cable to a free USB port of your computer.

6. Windows will detect the new hardware and automatically install the set-up

program of the USB Hub.

The USB ports of the 4 Port Email USB Hub are now ready for use.

Summary of content (5 pages)

PAGE 1
TRUST 4 PORT EMAIL USB HUB 1 Introduction UK This manual is intended for users of the ‘Trust 4 Port Email USB Hub‘. With the Trust 4 Port Email USB Hub you can expand the number of USB ports of your computer in a simple manner. The Email USB hub also is has internal melodies and indicator LEDs that, in combination with the enclosed software, notify you when you receive new e-mail. 2 Safety Before using, please read the following instructions carefully: 1.
PAGE 2
TRUST 4 PORT EMAIL USB HUB 3.2 E-mail notification software installation You must first install the associated software before using the e-mail notification function of the 4 Port Email USB Hub. Follow the steps below: 1. Insert the enclosed diskette into the disk drive of your computer. 2. Go to the start menu and select the option ‘Execute’. 3. Type [A:\SETUP.EXE] (without the brackets) in the input field and click on ‘OK’ to start the software installation. 4.
PAGE 3
TRUST 4 PORT EMAIL USB HUB 1. Click the ‘Enable ON/OFF line incoming mails checking’ option in order to be able to check incoming mail both online and offline. 2. Click the ‘Enable LED Indicator’ option to activate the LEDs at the top of the Email USB Hub. This will go on when new e-mail is received. 3. Click the ‘Enable default music play’ option and select the melody you want from the list; the Email USB Hub will play this melody when new e-mail is received.
PAGE 4
TRUST 4 PORT EMAIL USB HUB 4.2.5 Device test You can test the functionality of the Email USB Hub on the ‘Device test’ menu (see figure 8). You can check whether the LEDs and the sound function correctly: 1. Click on the ‘LED Indicator’ button to test the LEDs at the top of the Email USB Hub. The LEDs will go on. 2. Select a melody from the list and click on ‘Default music play’ button to listen to the melody. 3. Click on the ‘Stop LED and Music’ button to switch the LEDs and the melody off again.
PAGE 5
TRUST 4 PORT EMAIL USB HUB If you still have any problems after trying these solutions, please contact one of the Trust Customer Care Centres (see the table on the back). Please have the following information available: the article number (in this case 12538, for UK version 12539) and a good description of what and when a problem occurs.