Technical data

WIRELESS POWER SYSTEM 320SY
4
Note: When using the same device codes, keep the button of your remote
control pressed in long enough so that the signal is received by all
receivers.
5 Technical specifications
Description: Answer:
Wireless technology
RF / 433 MHz
Number of remote control buttons
1 rotation switch / 1 Slide switch/ 8 push
buttons
Number of switch buttons
2 rotation switches
Number of channels
16 home code (A - P); 16 devices (1 -
16) (256 total)
Operation frequency [channels 1 / 2/ 3/
4,....]
433.92 MHz +/- 200 kHz
Range (Metres)
30m. unobstructed area
Signalling switch
Green = on / red = off
Max switch capacity [Watt]
3500
RF approval no. (CE xxxx !)
CE 0560 (!)
Chipset
PT2262
Battery
A23, 12V
Weight [kg]
0.3
6 Troubleshooting
Problem Cause Solution
Remote control battery is
empty.
Replace the remote
control battery.
Other strong frequency
signals (of a wireless
telephone, loudspeakers, for
example) may interfere with
the operation of the
switching system
Move one of the
interfering transmitters,
receiver or change the
location from where you
operate the receiver.
Transmission range is
obstructed by walls.
Move the receiver or
make sure you are
located closer to the
receiver.
The remote control
responds poorly.
You are covering the remote
control with your hand too
much.
Make sure the remote
control is not covered by
your hand.