Datasheet

TRUST WIRELESS TABLET SERIES
6
Method
1. Read the solutions given below.
2. Check for up-to-date FAQs, drivers and instruction
manuals on the internet (www.trust.com/Item No.)
Problem Cause Possible solution
Windows does not
detect a new device
after connecting the
tablet.
The computer's USB port
does not work.
Delete the USB port from
the Device Manager and
reinstall it.
The tablet is
marked with an
exclamation mark ‘!’
in the ‘Device
Manager’.
The tablet is connected to a
USB hub which does not
have a power supply.
Connect the tablet to a USB
hub which has a power
supply or to a USB port on
your computer.
The pen/mouse
arrow shakes.
The tablet has been placed
too close to the monitor
causing interference.
Position the tablet further
away from the monitor.
The battery has been
inserted incorrectly.
Reinsert the battery (see
chapter 3.1).
The tablet/mouse
does not do
anything.
The battery is empty. Replace the battery (see
chapter 3.1).
The pen only works
in the relative mode
whilst the absolute
mode has been
selected.
The point of the pen is worn. Replace the point of the pen
as described in chapter 9.1.
The pen/ tablet
mouse reacts too
slowly or too
quickly.
The pen’s sensitivity has not
been set correctly.
Adjust the pen/tablet mouse
settings (see chapter 6.2).
See chapter 6.3 for
instructions on how to
configure the buttons.
The mouse buttons
do not work or do
not work correctly.
The pen has not been
configured correctly which
causes the mouse to not
work correctly.
Unselect ‘Auto Setting’ and
manually configure the
sensitivity in the ‘Buttons’
tab.
The default mouse
(serial or PS/2) no
longer works.
The default mouse has a
conflict with the pen and the
tablet, so these devices no
longer work.
Remove the pen and the
tablet mouse from the tablet
when using the mouse.
!