WIRELESS TABLET SERIES U K User’s manual D E F R I T E S P L N L P T G R V2.
WIRELESS TABLET SERIES Thank you for your purchase. Register your product via our Internet site at www.trust.com/register, so that you will be eligible for optimal guarantee and service support. You will also be automatically informed of the development of your and other Trust products.
WIRELESS TABLET SERIES A B B C D A Fig. 2 Fig. 1 A B A C Fig. 3 Fig. 5 Fig.
TRUST WIRELESS TABLET SERIES 1 Introduction This instruction manual is for users of the following TRUST WIRELESS TABLETS: • • • • U K TRUST 1200 WIRELESS SCROLL TABLET (Model 1200) TRUST 400 WIRELESS TABLET (Model 400) TRUST 200 WIRELESS TABLET (Model 200) TRUST 100 WIRELESS TABLET (Model 100) Basic knowledge of computers is necessary to install this device. Note: The term wireless refers to the wireless pen (and mouse) which is (are) supplied with this device.
TRUST WIRELESS TABLET SERIES NOTE: Install the driver before connecting the tablet. 4.1 Installing the driver Read the Quick Installation Guide for instructions on how to install the driver. 5 Installing the software Corel Painter Essentials is a drawing program which you can use with your Trust Tablet. The drawing program is on a separate CD-ROM. 5.1 Installing Corel Art Dabbler NOTE: Make sure all other programs are closed during the installation.
TRUST WIRELESS TABLET SERIES 6.1.2 Using the tablet with two monitors It is possible to increase the monitor area by using two monitors. To do so, you must have installed a video card (VGA card) with two monitor outputs on your computer. You can also install a second video card on your computer, although this will not work for some types of video card. If it does not work, contact the supplier or manufacturer of your video card.
TRUST WIRELESS TABLET SERIES 6.4 1. 2. 3. 4. Configuring the work area Click the tablet icon in the right-hand corner of the taskbar. Figure 1 will appear. Click the ‘Control’ tab. Figure 4 will appear. Alter the desired work area and click ‘OK’ to save the settings. The work area has now been configured as desired. Click 'OK' to save the settings. Click ‘Full Area’ (A) to use the entire work area. 6.
TRUST WIRELESS TABLET SERIES 5. 7. Select ‘Screen Hint’. The functions of the function buttons will then be visible on the screen when these are approached using the tablet mouse or the tablet pen. Click 'OK' to save the settings. Repeat points 2, 3 and 4 for the other function buttons. Click ‘OK’ again. 7 Tablet functions 6. All the tablets have a pen. There are different accessories, depending on the device that you have purchased, such as a mouse or a mouse with a scroll wheel.
TRUST WIRELESS TABLET SERIES Method 1. Read the solutions given below. 2. Check for up-to-date FAQs, drivers and instruction manuals on the internet (www.trust.com/Item No.) ! Problem Windows does not detect a new device after connecting the tablet. Cause The computer's USB port does not work. Possible solution The tablet is marked with an exclamation mark ‘!’ in the ‘Device Manager’. The tablet is connected to a USB hub which does not have a power supply.
TRUST WIRELESS TABLET SERIES Does the tablet work with other (drawing) programs? The problem is not listed here. The latest FAQs are available on the Internet. The mouse function always works, although the sensitivity is not supported by all drawing programs. Contact the manufacturer of the software program to find out which functions the program supports. Go to www.trust.com/item no. for FAQs and other product information.
SERVICE CENTRE 24 HOURS free service: www.trust.
