- TRUST 1290Z POWERC@M OPTICAL ZOOM User's manual

TRUST 1290Z POWERC@M OPTICAL ZOOM
Symbol Mode Description
Photo, Playback, Video No memory card in the camera.
Photo, Playback, Video The camera is unable to recognize
the card. Check that the card has
been inserted correctly. Format the
card using the external card reader.
Playback No images stored on the memory
card.
Photo, Video Memory card is full. No more
images can be stored on the card.
Playback Playback not possible, for example
because the recording is damaged.
Table 3: memory symbols shown on the LCD display
6.1 Formatting the memory
For the optimum use of the internal memory or a memory card format the memory
before use.
N.B.: formatting the memory card will delete all data stored on the
card, inclusive of the images which have been write-protected.
N.B.:
the card cannot be formatted in the write-protected mode (Lock).
1. Switch on the camera, and turn the selector dial to “SETUP”
2. Press the “MENU” button. See Figure 3.
3. Select [CARD FORMATTING] using the “
Ç
” button or the “
È
“ button
4. Press the “ENTER” button.
5. Select [YES] using the “
Ç
” button or the “
È
“ button
6. Press the “ENTER” button. The memory card will now be formatted.
7 User settings
7.1 Setting the language of the OSD menu
1. Switch on the camera, and turn the selector dial to “SETUP”
2. Press the “MENU” button.
3. Select [LANGUAGE] using the “
Ç
” button or the “
È
“ button (options: English,
German, French, Italian, and Spanish)
4. Select the language using the “
Å
” button or the “
Æ
” button
5. Your choice will be saved if you
a. Press the “ENTER’, “
Ç
” or “
È
” buttons
b. Change to another mode
c. Switch off the camera
7.2 Setting the date
1. Switch on the camera, and turn the selector dial to “SETUP”
2. Press the “MENU” button. See Figure 3.
6