Data Sheet

Part Numbers
www.trumeter.com
Trumeter (Europe)
Pilot Mill
Alfred Street
Bury,
BL9 9EF
Tel: [phone]
Email: [e-mail]
Trumeter (The Americas)
702 S. Military Trail
Deereld Beach, Florida
FL 33442,
USA
Tel: [phone]
Email: [e-mail]
Innovative Design Technologies Sdn. Bhd
Lot 5881, Lorong Iks Bukit Minyak 1
Taman Perindustrian Iks, 14000 Bukit Tengah
Penang, Malaysia
Web: www.idtworld.com
Tel: + 604 5015700
Email: [e-mail]
732-series-DS.v.2.1 03/2017
732-0001 3-Hole Round, 10-80VDC, ¼” [6.3mm] spade terminals, hours & 1/10’s
732-0002 Flush-Rectangular, 10-80VDC, ¼” [6.3mm] spade terminals, hours & 1/10’s
732-0003 Flush-Round, 10-80VDC, ¼” [6.3mm] spade terminals, hours & 1/10’s
732-0004 2-Hole Rectangular, 10-80VDC, ¼” [6.3mm] spade terminals, hours & 1/10’s
732-0013 Panel mt, Round, Cup, stainless steel bezel, 10-80VDC, ¼” [6.3mm] spade terminals, hours & 1/10’s
732-0023 Panel mt, Round, Stirrup, stainless steel bezel, 10-80VDC, ¼” [6.3mm] spade terminals, hours & 1/10’s
732-0030 Square 1.9” (48mm), 10-80VDC, ¼” [6.3mm] spade terminals, hours & 1/10’s
5003-008 NEMA 4X, 12 Gasket for Models 732-0003, 732-0013 & 732-0023
5003-009 NEMA 4X, 12 Gasket for Model 732-0002
5003-010 NEMA 4X, 12 Gasket for Model 732-0004
5003- 011 NEMA 4X, 12 Gasket for Model 732-0001
.7 [18]
1.87 [47.5]
MAX
.09 [2.3]
.21 [5.3]
Ø1.98 [Ø50.3]
.93 [23.5]
1.43 [36.3]
2.17 [55.1]
MAX
Ø.16 [Ø4.0]
Ø.13 [Ø3.2]
Ø2.53 [Ø64.3]
Ø2.42 [Ø61.5]
Ø2.80 [Ø71.1]
25°
REF
1/10
.7 [18]
1.87 [47.5]
MAX
.10 [2.5]
.11 [2.8]
.93 [23.5]
1.43 [36.3]
2.17 [55.1]
MAX
Ø2.24 [Ø56.9]
Ø1.95 [Ø49.4]
Ø1.82 [Ø46.2]
FOAM
GASKET
Ø1.98 [Ø50.3]
25°
REF
1/10
Panel Opening: 2.0” [50.6]
Maximum Panel Thickness: 0.40 [10.2]
Panel Opening: 2.0” [50.6]
NOTE: SUPPLIED WITH MOUNTING HARDWARE
Ø2.2 [Ø56]
Ø2.5 [Ø64]
~
GLASS LENS
1/10
.7 [18]
1.88 [47.8]
MAX
.30 [7.6]
.12 [3.0]
.3 [8]
1.53 [38.9]
METALLIC RING
2X #8-32UNF
15°
REF
Ø2.25 [Ø57.2]
Ø1.95 [Ø49.5]
1.88 [47.8]
MAX
.30 [7.6]0.3[ 21. ]
Ø1.98 [Ø50.3]
.3 [8]
Ø2.25 [Ø57.2]
Ø2.2 [Ø56]
Ø2.5 [Ø64]
~
GLASS LENS
METALLIC RING
3/8-16UNC
NOTE: SUPPLIED WITH MOUNTING HARDWARE
2.89 [73.4
]
.7 [18]
15°
REF
1/10
Cup Stirrup
]6.05[ ”0.2 :gninepO lenaP
]6.05[ ”0.2 :gninepO lenaP
dnuoR eloH-3dnuoR-hsulF
.7 [18]
1.89 [48.0]
MAX
.10 [2.5]
.93 [23.5]
1.43 [36.3]
2.19 [55.6]
MAX
1.47 [37.4]
1.03 [26.2]
.88 [22.4]
.15 [3.8]
1.75 [44.5]
2.05 [52.1]
2X Ø.15 [Ø3.8]
25°
REF
1/10
.7 [18]
1.89 [48.0]
MAX
.10 [2.5]
.93 [23.5]
1.43 [36.3]
2.19 [55.6]
MAX
1.60 [40.6]
1.08 [27.4]
.88 [22.4]
25°
REF
1/10
]1.42 X 8.63[ ”59.0 X ”54.1 :gninepO lenaP]1.42 X 8.63[ ”59.0 X ”54.1 :gninepO lenaP
Maximum Panel Thickness: 0.03 to 0.63 [0.76 to 16.00]
2-Hole Flush-Rectangular