User Manual

10 11
Maintenance, Cleaning & Storage
Use a slightly damp towel to clean the device and dry with a soft cloth.
Never store in direct sunlight or at temperatures above 104 °F (40°C).
Always turn the device off before cleaning.
Charging
Fully charge the battery for up to six hours before  rst use.
To charge the unit, connect the DC end of the supplied adapter to the battery’s charging port
and plug A/C side cable into a wall outlet.
The LEDs above the battery icon indicate battery level.
With the A/C adapter plugged in, the  ve LED lights on the unit  ash to show battery level
and indicate active charging.
A full charge is indicated when all LED lights stop  ashing and remain fully illuminated.
The battery may be recharged at any time and at any battery level.
It is not recommended to fully deplete the battery to the red LED level.
The average run-time is 2+ hours depending on speed level and pressure applied during use.
Unplug the charger from the outlet when not in use for extended periods. Make sure the
charger cord is located so that it will not be stepped on, tripped over, or otherwise subjected
to damage or stress. Have a damaged charger replaced immediately.
Pull the plug rather than the cord to reduce the risk of damage to the electrical plug and cord.
Never carry charger by its cord. Keep the cord from heat, oil, and sharp edges. Do not use or
charge with a damaged cord. Do not stretch the charger cord or place the cord under strain.
Keep the cord away from heated surfaces. Do not handle the charger, including the charger
terminals or IMPACT Therapy™ Device v2 with wet hands.
Fork
Pinpoint speci c areas around certain muscle groups
like your traps, forearms , etc.
Cylinder
Pinpoint muscle treatment. Target smaller areas
of your body or use on speci c trigger points.
Massage Heads
Flat
A wider surface area made for larger parts of your body.
Ball
Large, versatile massage head. The best attachment
to start with.
Wedge
Scraping tool for targeting shoulder blades and IT bands.