Brochure

Truma UltraRapid Gas
Hot Water System
Truma UltraRapid Gas / Electric
Hot Water System
Water
Contents 14 litres 14 litres
Pump pressure max. 2.8 bar max. 2.8 bar
System pressure max. 4.5 bar max. 4.5 bar
Selectable temperature 60 °C or 70 °C –
Connection Pressure-resistant hot water hose, Ø 12 mm for rigid pipe installations
Gas
Type of Gas Liquid gas (Propane)
Test point pressure 2.75 kPa 2.75 kPa
Nominal input 4.7 MJ/h 4.7 MJ/h
Heat output 4.1 MJ/h 4.1 MJ/h
Gas consumption 90 g/h 90 g/h
Current
Power supply – 230 V / 240 V AC, 50 Hz
Connection 12 V DC 12 V DC + 230 V / 240 V AC
Output power 230 V / 240 V – 1300 W (5.7 A) / 1415 W (5.9 A)
Power consumption
Heating up 230 V / 240 V – 1300 W (5.7 A) / 1415 W (5.9 A)
Power consumption 12 V
Ignition 0.17 A 0.17 A
Heating up 0.08 A 0.08 A
Stand-by 0.04 A 0.04 A
Heating times
Heating up time from approx. 20 °C up to approx. 65 °C
Mixed mode – approx. 28 min
Electrical mode – approx. 40 min
Gas mode approx. 45 min approx. 45 min
Weight (excluding contents
and accessory kits)
6.7 kg 7.2 kg
The electric heating element in the water heater is supplied with a mains cable and fitted 3-pole, earthed plug (in compliance
with the norm AS/NZS 3112/2000). All other technical parameters remain the same.
Truma UltraRapid
Dimensions and technical details
The new Truma UltraRapid Hot Water System is the same height as the previous Boiler and there are only
minimal dierences in the length and the width.
Technical details
water
connections
gas connection
with test point
electronic
cowl
cut out
349
347
383
92
cut out
42 5
129
324
168
47
30
132
25
all dimensions in mm