Installation Guide

Truma - Tips, questions and answers about our Saphir air conditioning ... http://www.truma.com/tr/tr/air-conditioning/tips-installation.php
1 of 4 24/08/2011 2:16 PM
Benefits, tips, answers
The choice of installation location
Along with various other factors, the choice of installation location plays a key role in ensuring optimum air conditioning within
the vehicle. Therefore, you should select the system's installation location on the basis of the following criteria:
Centre of gravity as close as possible to the axle
Installation location opposite entrance door
Ability to run the cold air ducts upwards (unless eco installation is desired)
Ability to position the remote control receiver for optimum control
The installation process
The actual process of installing the air conditioning unit is really easy. All you need are two cut-outs in the floor of the vehicle to
enable air exchange (air inlet, air outlet) and a hole for the condensation trap. The holes in the floor are cut out using the
template supplied. After that, the 230 V connection is made, the infrared receiver for the remote control is installed and a
connection for the circulating air is established between the installation and living areas.
Thanks to Truma’s flexible cold air ducts, you can route the cold air in accordance with your individual needs. Naturally, you
have the option of reconfiguring this later on should you need to.