Install Instructions
6
It is imperative that connection is carried out with care while
observing the correct cable colours!
20
18
19
17
Fig. 8
Plug connector of IR receiver cable (17) into the socket (19).
The connection (18) is a Com connection for commu-
nication purposes, and is not needed to operate the
device.
The cables must be long enough for the device to be pulled
out of the false floor with the cables attached. All cables must
be secured with clamps!
An insulating device for providing all-pole insulation from
the mains with contact clearance of at least 3.5 mm must be
provided at the vehicle end for carrying out maintenance and
repair work.
Function test / IR remote control mounting
Position IR remote control mounting as close as possible to
the IRīreceiver (12) so that the air conditioning system can
be operated without removing the remote control from the
mounting.
All device functions must subsequently be tested as described
in the operating instructions.
The operating instructions must be handed over to the vehicle
owner.