Installation & Assembly

Place the drawer slide A ⑪
onto the 2 holes area shown
at left side panel A. Then
tighten it with 2 screws ⑩.
Do the same for the 3 other
slide A ⑪.
Pre - Assembly
6
Insert the pvc dowels ⑥,
using hammer to gently tap them in.
Insert the pvc dowels ⑥,
using hammer to gently tap them in.
Insert the mini fix ⑤ (nuts) with the cross arrow
mark facing upward and aim to panel A 's top
thru holes. (As shown)
Insert the mini fix ⑤ (nuts) with the cross arrow
mark facing upward and aim to panel D 's top
thru holes. (As shown)
PANEL A
PANEL D
Nail Protection Nail ⑦, provided with hammer
onto the bottom edge of panel A as shown.
Nail Protection Nail ⑦, provided with hammer
onto the bottom edge of panel D as shown.
Place the drawer slide A ⑪
onto the 2 holes area shown
at left side panel D. Then
tighten it with 2 screws ⑩.
Do the same for the 3 other
slide A ⑪.
11
5
6
5
5
6
6
7
7
7
7
11
10
10
5
6