Assembly Instructions

1. Insert the threaded
ends of the front legs
(#5) into the holes at
the bottom of the
headboard (#1). Turn
right to tighten.
2. Align the rear legs
(#6) to the bottom
of the footboard
(#2). Then insert 4
screws (#E) into
each leg and secure
using a screwdriver.
#E
1. Prepare 8 bolt assemblies by first inserting a
lock washer (#B) onto the bolt (#A) then a
flat washer (#C) onto that same bolt (#A).
2. Align the hooks at the end of the
side rails (#3) to the holes along
the headboard (#1) and footboard
(#2). Then insert 2 bolt assemblies
into each end and secure using the
Allen wrench (#D).