Assembly Instructions

PAGE 1
PAGE 2
PAGE 3
PAGE 4
1. Insert the threaded ends of the front legs (#5) into the holes at the bottom of the headboard (#1). Turn right to tighten. 2. Align the rear legs (#6) to the bottom of the footboard (#2). Then insert 4 screws (#E) into each leg and secure using a screwdriver. #E 1. Prepare 8 bolt assemblies by first inserting a lock washer (#B) onto the bolt (#A) then a flat washer (#C) onto that same bolt (#A). 2.
PAGE 5
1. Place the end caps (#F) onto the side rails (#3), then insert the slats (#5) into those end caps. 1. Prepare 13 slats byMake applying anthe endcurved cap (#F)side onto end of the slats (#4). sure is each upward. 2. Apply the slats onto the side rails (#3).