Installation & Assembly

Step 1

Step 2

Insert the Right Back Leg(D) into the mounting position of Chair(A), and

attach using Bolts(①), Spring Washers(②) and Washers(③) with Allen

Key(④).

Repeat the same process to install the Left Back Leg(D).

After finish installing the Back Legs, use the same way to install the Right

Front Leg(B) and Left Front Leg(C).

Do not fully tighten the Bolts.

Place the Seat(A) on a clean, non-marring surface with the bottom facing

you, as shown in the picture above.

Carefully peel away the dust cover from the edge, and remove the Legs

and Hardware.

This Club Chair has multiple parts and may require up to 30 minutes to

assemble. To give you an overview of the Club Chair parts, the above

picture is to help you put the various parts into perspective. Please read

through the instructions below to familiarise yourself with the parts and

steps before assembly.

①

②

③

④

Page 4 OF 6