User's Manual

ManualsBrandsTruePath Wireless ManualsElectronicsTPW-2458-B-4A/M "Long Reach" Access Point

CONFIDENTIAL

10 (19)

BTS TPW2458-B-4A/M

Version 1.5

SYSTEM USER GUIDE

Date 22 June 2011

change without notice. The specifications and information regarding the products in this document are subject to change without notice. All statements, information, and

recommendations in this document are believed to be accurate, but are presented without warranty of any kind, express, or implied. Users must take full responsibility for their

application of any products. Trademarks, brand names and products mentioned in this document are the property of their respective owners. All such references are used

strictly in an editorial fashion with no intent to convey any affiliation with the name or the product's rightful owner.

In either case, the Ethernet data line is terminated at an Ethernet switch or router and

the power cable is plugged into the house power supply.

2.1.3 Dual-Band Configuration (2.4 and 5.8GHz)

The TPW2458-B-4A/M is outfitted with (2) sets of antennas designed to operate in

either the 2.4 or 5.8GHz radio frequencies (software configurable). For example, Figure

and Figure 6 show the base station configured with 2.4GHz patch antennas and

5.8GHz omnidirectional antennas (rear and front views).

Figure 5 - Dual Band BTS (Rear View)

Figure 6 - Dual Band BTS (Front View)

To configure the radio frequency and channel bandwidth, the system is equipped with a

command line interface. This and other operational configuration parameters are

discussed in the following sections.

3. Command Line Interface (CLI)

After the base station and/or client are connected to power and Ethernet, the system

should initially be connected to a computer. NOTE: the Ethernet port is equipped with

auto MDI-X rollover capability.

The default IP address configured as factory default is:

192.168.0.20

3.1 Connecting/First-Time Login

The default user name and password is:

Username: admin

Password: admin