User manual

MenU:

– Press the “OK / Menu” key on the parent unit to

access the menu. Navigate using the “left” and

“right” arrow keys. The “Back” key takes you

back one page or to the monitoring screen.

– The menu contains 6 icons:

1. Camera – Pairing*

2. Alarm – Alarm settings

3. Settings – Basic settings

4. VOX – VOX mode settings

5. Languages – Language settings menu

6. System Info

Note: *The parent and baby units are already paired, it is not necessary to do this again.

Only select if you want to re-pair the units, e.g. when the signal has been lost.

• 1 – Camera – Pairing

To re-pair, press the “OK / Menu” key twice. Next

press and hold the “Reset” key on the back of

the baby unit for 10 seconds. When successfully

paired, the message “Register Successful” is dis-

played.

• 2 – Alarm – Alarm settings

Press the “PTT” key (microphone symbol) to move

the cursor. Press the “left” and “right” arrow keys

to change value and press OK to set the time.

• 3 – Settings – Basic settings

Here you can set the time and date, the time/date

format, the unit of temperature, the frequency

and the LCD backlight. Press the “PTT” key (micro-

phone symbol) to move to the sub-menu.