Specification
Model #99 E-Z
One angle valve and supply cover
__________________
Model #100 E-Z
One P-trap cover
________________
_
Model #400W
*
One P-trap cover
________________
_
Model #101 E-Z
One P-trap cover, one angle
valve cover
________________
_
Model #401W
*
One P-trap cover, one angle
valve cover
____________________________________________
Material Molded vinyl
____________________________________________
Nominal Wall 1/8" constant
____________________________________________
Durometer 70 -80 - Shore A
____________________________________________
UV Protection Will not fade or discolor
____________________________________________
Durability Virtually indestructible
____________________________________________
Trimming (E-Z Series) Internal,
E-Z Tear-To-Fit
trim feature
____________________________________________
Fasteners (E-Z Series) Internal
E-Z Grip
fasteners
(reusable)
____________________________________________
Color China white
____________________________________________
Paintability Apply Latex paint
____________________________________________
Burning Characteristics Self extinguished
ASTM D-635 0 sec (ATB) 0 mm (AEB)
____________________________________________
Bacteria/Fungus ASTM G21 and G22/
Resistance Result: 0 growth
____________________________________________
Maintenance Use common detergents
Antimicrobial Vinyl Minimizes Maintainance
Lav Guard 2 is molded from impact-resistant, stain-
resistant, antimicrobial vinyl. Its smooth surface makes
it exceptionally easy to clean and maintain.
____________________________________________
Submittal Sheet
ADA-compliant undersink protection
Model #102 E-Z
One P-trap cover, two angle valves
and covers
___________________
Model #402W
*
One P-trap cover, two angle valves
and covers
___________________
Model #103 E-Z
One P-trap cover, two angle valves
and supply covers, one 5" offset
tailpiece wheelchair strainer cover
___________________
Accessory #105 E-Z
One 5" offset tailpiece wheelchair
strainer assembly
#100 E-Z Series (shown above right) for tubular and cast brass P-trap assemblies.
#400W
*
Series (original design) for schedule 40 P-trap assemblies.
Manufactured under one or more of the following U.S. or Canadian patents.
Other patents pending.
5,303,730 5,360,031 5,524,669 5,564,463 5,678,598 5,699,828 5,915,412
5,915,413 5,901,739 5,960,820 2,075,324 2,119,427 2,136,027 2,158,083
Internal ribs add cushioning
and thermal resistance
10" tailpiece
cover
E-Z Tear-To-Fit
trim grooves
E-Z Grip
internal
fasteners
Vent hole keeps P-trap dry
Vent slots keep
valve dry
Install over
pipes. Press finger
recesses to engage
internal fasteners.
To remove covers,
firmly pull seam
apart using a
strong grip.
Tear-to-fit on
internal
dimensioned
tear lines.
Accessory #105-K
Kohler 6" offset
____________________
Accessory #106 E-Z
One basket strainer cover and offset
waste cover (adjustable to 18")
____________________
Accessory #107 E-Z
Two basket strainer covers and center
or end outlet waste cover (adjustable)
____________________
Accessory #Ex99 E-Z
One 14" extension f
____________________
or water supply
Accessory #Ex100 E-Z
One 14" extension for drain waste
arm or tailpiece
Center Outlet
Accessory
106 E-Z
End Outlet
Accessory 107 E-Z
(Configuration Options Shown)
Accessory
105 E-Z
Shown with Accessory #105 E-Z (fits all standard 5" offset
wheelchair strainers). Accessories105 E-Z,106 E-Z, and 107 E-Z
can be purchased separately.
NOTE: Accessory #105 E-Z is included in #103 E-Z kits.
E-Z
Series
Shown
*All #400W series items are the “original” LAV GUARD
®
design and
construction.
Specifications may change without notice.
General Description:
LAV GUARD
®
2E-Z Series waste and supply piping
covers satisfy ADA compliance requirements. Built-in E-Z
Grip internal fasteners and internal, E-Z Tear-To-Fit
trimming feature allow for fast installation without tools.
Series #100 E-Z kits are designed to fit on all tubular and
cast brass P-trap assemblies. Series #400 kits are the
“original” LAV GUARD design and fit schedule 40 ABS
and PVC P-trap assemblies — regardless of their
geometry or rotational offset.Valve cover completely
encloses angle valve and supply tube for both handled
and keyed type water stops.
10" waste arm cover with internal
E-Z Tear-To-Fit trim feature
9" supply
tube cover
with internal
E-Z Tear-To-Fit
trim grooves
J-bend covers
all tubular and cast brass
configurations