User's Manual

ADA HEIGHT INSTALL GUIDETEC_TM_120 REV. B 02/02/2022 Page 65 of 74
ADJUSTMENTS, SERVICING & REPLACING COMPONENTS
REVERSING DOOR
REQUIRED TOOLS
• 1/8" Hex Head Allen Wrench
• Drill (Optional)
PROCEDURE
1. Loosen the hinge bolts and remove the door
See fig. 1.
NOTE: DO NOT REMOVE THE HINGES FROM
THE DOOR.
2. Move the remaining hardware to the opposite
corners. See fig. 2.
NOTE: THE DOOR LOCK POSITION IS
DIFFERENT FOR EACH SIDE.
LEFT-HINGED: BOTTOM RIGHT CORNER;
RIGHT-HINGED: UPPER LEFT CORNER.
3. Rotate the door 180° and secure it to the cabinet.
See figs. 3 and 4.
4. Verify the door closes correctly and the gasket
seals without gaps.
FIG. 1. Do not remove the hinge bolts.
FIG. 2. Be sure to move the hardware to the opposite corners.
FIG. 3. Rotate the door 180° and install.
FIG. 4. Completed installation.
180°